Always ready to answer your questions
Free training and installation at the project site
High power and long lifespan of the machine
Tiran Tunnel Bistoon Company, with over a decade of experience in designing and manufacturing machinery for construction and infrastructure projects, is always dedicated to providing highquality and innovative services. By utilizing modern technologies, a specialized team, and a commitment to international standards, this company has become one of the leading manufacturers of industrial machinery. The goal is to build a sustainable and safe future for society.
With this device, I have been able to do floor leveling with pumice, laying underlayment, and transferring dry materials. I can cover 500 meters daily, my speed has increased, and I no longer need a hoist. From the smallest to the largest part, it reaches me, who is 60 kilometers away from the company, within an hour. Thanks to the Tiran Tunnel Bisotun team.
I have been working with this device for 5 years. I have used it on 3D panel walls, reinforcement, cement blocks, and ceramic tiles. It has been excellent, and I have sprayed up to 800 meters with it. I am completely satisfied with this set.
Since I bought this device, I initially covered 60 meters per day in the first week, but now I cover 450 meters per day with a thickness of 8 centimeters. The advantage is that the cement consumption is minimized while the strength of the mortar is maximized.
I naturally cover 150 to 200 meters per day at height and have reduced my costs by 50%. The tallest height I have reached so far with it is 8 floors. In less than four months, I recovered my investment and made back the money spent on purchasing the device. The after-sales service of this company is excellent, and I would like to extend special thanks to Mr. Ghorbani and dear Mr. Doosti.
Approximately 60 to 70 percent of the work is done by the device, making the process mechanized. The good thing is that whenever you want to start working, the company sends personnel to teach you how to operate the device, and it takes less than a week to learn it.
This device has significantly increased our execution speed; in one day, I plastered 230 meters. Polymer gypsum is also readily available, it’s moisture-resistant, and it’s excellent for northern cities. Thanks to the Tiran Tunnel Bisotun team.
We purchased a cement spraying machine from Tiran Tunnel Company for shotcrete and plaster application. We were honestly satisfied with the machine in terms of quality, speed, and cost-effectiveness. I would like to thank Mr. Ghorbani for procuring this machine.
I purchased a cement spraying machine from this company, and it arrived in less than 48 hours. Even though my project was in Basra, Iraq, a specialist came immediately for training and set up the machine, and we learned how to operate it in a single day. Friends who are worried about the mortar getting stuck in the hose should be careful about the ratio of mortar to cement to avoid this issue. Thanks to the Tiran Tunnel Bisotun team.
Shotcrete refers to a method of spraying concrete, where concrete or mortar is sprayed onto a surface with high pressure through a nozzle. This method is primarily used in tunnel construction, stabilizing stone walls, and building concrete structures.
Shotcrete offers numerous advantages compared to traditional concrete pouring methods due to its high adhesiveness and the lack of the need for formwork.
Dry shotcrete is typically used in situations where control over the amount of water is required or when working in hard-to-reach locations. This method produces more dust and may result in greater material wastage. In contrast, wet shotcrete, where the concrete is pre-mixed, offers higher adhesion and quality, produces less dust, and is more suitable for executing more precise projects, such as concrete coatings.
The screed method is a modern flooring technique that uses mechanized machines to mix the mortar evenly, which is then transferred to the site via a hose. This method increases the speed of execution, ensures level surfaces, and reduces the consumption of materials such as cement and tile adhesive. Screed does not require formwork or reinforcement and creates a surface with high compressive strength. For this reason, it is widely used in modern and large-scale projects.
There are various methods for flooring construction in buildings, such as the traditional manual method, the screed method, and foam concrete. Each method has its specific application depending on the type of project, budget, and execution requirements. The screed method, due to its high speed, accuracy, material savings, and high compressive strength, has gained significant attention today.
There are several types of cement spraying machines, including:
Screw Machines: For high precision spraying, lower consumption, and greater uniformity.
Piston Machines: For high-power spraying, heavy mortar, or working in tough conditions.
Plastering is done using manual and mechanized methods. In the manual method, the craftsman applies the plaster on the wall or ceiling using a trowel. In the mechanized method, a plaster spraying machine is used for faster and more uniform plastering on surfaces. Other methods include traditional plastering, single-stage plastering, and double-stage plastering, each of which is used depending on the type of project.
The plaster spraying machine increases the speed of plastering, reduces plaster consumption, ensures uniform coverage, reduces dust, and also minimizes the labor required in construction projects. This machine is particularly useful in large construction projects, hospitals, and commercial centers that require fast and high-quality execution.
The TTB brand is formed by experienced specialists. We are honored to receive your constructive suggestions and feedback from colleagues, professors, and esteemed engineers to improve the quality and efficiency of our products.
